Administrator
Znam da radi na steam cs-u, na non steamu nisam pokusavao. 
Here's a little list that will probably help more than one gamer. POGOTOVO SU VAZNE ONE ZA FPS...
Please note that some commands are forbidden in certain leagues!
Adding these to your CS link or in Steam (my games > right click on CS > Properties)
-console (add console)
-nojoy (remove joystick support, gives more ram)
-noipx (removing LAN options, gives more ram)
-noforcemparms -noforcemaccel -noforcemspd (disable mouse acceleration)
-dev (removing 100fps limit *STEAM ONLY*)
-heapsize (gives CS memory, set it by kbytes, example; i have 384mb of ram so i used:
-heapsize 300000 (it tells cs to use 300mb of ram as cache for CS) , set it to 60-80% of your total ram, help's alot in 1.6)
Sensitivity:
CS is not Quake or UT, you dont need high sensitivity, you dont have
rockets and plasma rifles, also CS has a great sound engine so you dont
need to make some "FAST" moves. Getting used to low sensitivity will
improve your aiming, lower your sensitivity by 0.5 every week, and you
may see improvements, it also depents on your mouse and options,
personally im using 2.5 because i have ie. Lower sensitivity is better,
so get used to it.
Config commands:
disable voicecomm (we got team-speak, ventrilo, why hear these 10 year old kids yelling?)
voice_scale "0"
voice_enable "0"
voice_modenable "0"
sv_voiceenable "0"
voice_forcemicrecord "0"
disable EAX (gets more FPS)
s_eax "0"
disable A3D (not allowed in CPLS)
s_a3d "0"
sound delay (after you turned off Sound acceleration, or random sound delays)
_snd_mixahead "0" or "0.1"
Connection (Optimal Settings):
rate "25000"
cl_updaterate "100"
cl_cmdrate "100"
cl_lc "1"
cl_lw "1"
ex_interp "0.1"
if you have lags with the optimal settings try these values:
rate "7500-10000"
cl_updaterate "20"
cl_cmdrate "30"
1.5/1.6 Graphic Tweaks (get more fps):
gl_cull "1"
gl_keeptjunctions "0"
gl_texsort "0"
gl_palette_tex "1"
r_norefresh "0"
gl_round_down "3"
gl_picmip "2"
gl_playermip "2"
gl_ztrick "1"
gl_texturemode "GL_LINEAR_MIPMAP_NEAREST"
viewsize "120"
brightness "1"
gamma "3"
fastsprites "0"
fps_max "200"
max_shells "0"
cl_corpsestay "0"
max_smokepuffs "0"
mp_decals "0"
d_spriteskip "0"
cl_himodels "0"
model "gordon"
topcolor "30"
bottomcolor "6"
cl_minmodels "1"
cl_weather "0"
gl_affinemodels "1"
gl_alphamin "0.25"
gl_clear "0"
gl_dither "1"
gl_flipmatrix "0"
gl_flashblend "0"
gl_lightholes "0"
developer "1"
r_dynamic "0"
r_novis "0"
r_traceglow "1"
r_wateralpha "1"
r_mirroralpha "0"
r_bmodelhighfrac "5.0"
r_lightmap "0"
gl_max_size "128" (16/32/64/128/256) (less size less quality and more performance)
precache "1"
USB Mouse or PS/2 Mouse (if your mouse supports USB USE IT:
m_filter "0" for USB
m_filter "1" for PS/2
Zoom Sensitivity (fixed in 1.6, but you still can change it):
zoom_sensitivity_ratio "1-3" (i using 1.6)
disable ATI Truform:
ati_npatch "0"
ati_subdiv "0"
Enable MMX
r_mmx "1"
Right or Left Hand:
cl_righthand (1 is right hand, 0 is left hand)
Disable AutoWeaponSwitch:
_cl_autowepswitch "0"
Used to old cs versions? Want the old crosshair? This is for you:
cl_dynamiccrosshair "0"
Remove the lame new gui menus:
setinfo _vgui_menus "0"
Add these scripts to your autoexec.cfg or userconfig.cfg:
//Hand Switch Script
alias "LH" "echo - Left Hand Selected -; cl_righthand 0; bind h RH"
alias "RH" "echo - Right Hand Selected -; cl_righthand 1; bind h LH"
Sick of holding shift key to walk? Add this to your autoexec.cfg:
//Walk/Run Script
alias "walk" "echo - Walk Selected -; +speed; bind SHIFT run"
alias "run" "echo - Run Selected -; -speed; bind SHIFT walk"
Advanced Graphic Commands:
1 - enable
0 - disable
-Control the blood, disable it to get more performance. But who doesnt like blood?
violence_ablood
violence_hblood
-Control the gibs, disable to get more performance
violence_agibs
violence_hgibs
-Control the ATI Trufrom, disable to get a big fps improvement, enable for more quality
ati_npatch "0"
ati_subdiv "0"
-Disabling it will make the game render everything, even objects you dont see, only crazy people will disable it.
gl_cull
-Enabling this will make sure you wont see any crashes and/or 3d bugs, disable it for more FPS
gl_keeptjunctions
-Multi texturing, disable it only on old 3d cards
gl_texsort
-MMX, enable to improve performance
r_mmx
-Joystick, disable for more ram and to improve performance
joystick
-disable dither only if you have a really good computer, enable for more performance improvement
gl_dither
-Enable for more model quality, disable for more performance-
gl_smoothmodels
-Vsync, enable to limit the fps into your refresh rate, disable for highest fps
vid_wait
-Lightholes, disable for a little performance gain-
gl_lightholes
-Enable to see some objects like 1337 sunglasses and stuff like that, disable for more performance
r_mirroralpha
-Precaching, disable if you have 64mb or less, enable if you have 64mb or more, improves performance
precache
-Enable or disable the rain in aztec
cl_weather
-Loading only 2 models, SAS and 1337, enable for big performance gain, disable to see all the models
cl_minmodels
-Round down, set value from 0-4 , the lower the number the higher the quality, higher number equals more performance
gl_round_down
-Map quality, set value from 0-2, lower number equals more quality, higher number equals more performance
gl_picmip
-Player model quality, set value from 0-2, lower number equals more quality, higher number equals more performance
gl_playermip
-Texture size, values are: 16,32,64,128,256,512,1024 (default is 128), lower value means less quality and more performance
gl_max_size
-Texture Quality (for Direct3D Trilinear bring more performance, and for OpenGL Brilinear bring more perormence) values
GL_LINEAR_MIPMAP_LINEAR (Trilinear, high quality)
GL_LINEAR_MIPMAP_NEAREST (Trilinear, low quality)
GL_NEAREST_MIPMAP_LINEAR (Bilinear, high quality)
GL_NEAREST_MIPMAP_NEAREST (Bilinear, high quality)
gl_texturemode
Example:
gl_texturemode "GL_NEAREST_MIPMAP_NEAREST"
-Fastsprites, control explosions and stuff like that, set value
from 0-2, lower number equals more quality, higher number equals more
performance
copy/paste sa KGB-HQ foruma
P.S Samo za steam CS,meni je dosta pomoglo -.-
Here's a little list that will probably help more than one gamer. POGOTOVO SU VAZNE ONE ZA FPS...
Please note that some commands are forbidden in certain leagues!
Adding these to your CS link or in Steam (my games > right click on CS > Properties)
-console (add console)
-nojoy (remove joystick support, gives more ram)
-noipx (removing LAN options, gives more ram)
-noforcemparms -noforcemaccel -noforcemspd (disable mouse acceleration)
-dev (removing 100fps limit *STEAM ONLY*)
-heapsize (gives CS memory, set it by kbytes, example; i have 384mb of ram so i used:
-heapsize 300000 (it tells cs to use 300mb of ram as cache for CS) , set it to 60-80% of your total ram, help's alot in 1.6)
Sensitivity:
CS is not Quake or UT, you dont need high sensitivity, you dont have
rockets and plasma rifles, also CS has a great sound engine so you dont
need to make some "FAST" moves. Getting used to low sensitivity will
improve your aiming, lower your sensitivity by 0.5 every week, and you
may see improvements, it also depents on your mouse and options,
personally im using 2.5 because i have ie. Lower sensitivity is better,
so get used to it.
Config commands:
disable voicecomm (we got team-speak, ventrilo, why hear these 10 year old kids yelling?)
voice_scale "0"
voice_enable "0"
voice_modenable "0"
sv_voiceenable "0"
voice_forcemicrecord "0"
disable EAX (gets more FPS)
s_eax "0"
disable A3D (not allowed in CPLS)
s_a3d "0"
sound delay (after you turned off Sound acceleration, or random sound delays)
_snd_mixahead "0" or "0.1"
Connection (Optimal Settings):
rate "25000"
cl_updaterate "100"
cl_cmdrate "100"
cl_lc "1"
cl_lw "1"
ex_interp "0.1"
if you have lags with the optimal settings try these values:
rate "7500-10000"
cl_updaterate "20"
cl_cmdrate "30"
1.5/1.6 Graphic Tweaks (get more fps):
gl_cull "1"
gl_keeptjunctions "0"
gl_texsort "0"
gl_palette_tex "1"
r_norefresh "0"
gl_round_down "3"
gl_picmip "2"
gl_playermip "2"
gl_ztrick "1"
gl_texturemode "GL_LINEAR_MIPMAP_NEAREST"
viewsize "120"
brightness "1"
gamma "3"
fastsprites "0"
fps_max "200"
max_shells "0"
cl_corpsestay "0"
max_smokepuffs "0"
mp_decals "0"
d_spriteskip "0"
cl_himodels "0"
model "gordon"
topcolor "30"
bottomcolor "6"
cl_minmodels "1"
cl_weather "0"
gl_affinemodels "1"
gl_alphamin "0.25"
gl_clear "0"
gl_dither "1"
gl_flipmatrix "0"
gl_flashblend "0"
gl_lightholes "0"
developer "1"
r_dynamic "0"
r_novis "0"
r_traceglow "1"
r_wateralpha "1"
r_mirroralpha "0"
r_bmodelhighfrac "5.0"
r_lightmap "0"
gl_max_size "128" (16/32/64/128/256) (less size less quality and more performance)
precache "1"
USB Mouse or PS/2 Mouse (if your mouse supports USB USE IT:
m_filter "0" for USB
m_filter "1" for PS/2
Zoom Sensitivity (fixed in 1.6, but you still can change it):
zoom_sensitivity_ratio "1-3" (i using 1.6)
disable ATI Truform:
ati_npatch "0"
ati_subdiv "0"
Enable MMX
r_mmx "1"
Right or Left Hand:
cl_righthand (1 is right hand, 0 is left hand)
Disable AutoWeaponSwitch:
_cl_autowepswitch "0"
Used to old cs versions? Want the old crosshair? This is for you:
cl_dynamiccrosshair "0"
Remove the lame new gui menus:
setinfo _vgui_menus "0"
Add these scripts to your autoexec.cfg or userconfig.cfg:
//Hand Switch Script
alias "LH" "echo - Left Hand Selected -; cl_righthand 0; bind h RH"
alias "RH" "echo - Right Hand Selected -; cl_righthand 1; bind h LH"
Sick of holding shift key to walk? Add this to your autoexec.cfg:
//Walk/Run Script
alias "walk" "echo - Walk Selected -; +speed; bind SHIFT run"
alias "run" "echo - Run Selected -; -speed; bind SHIFT walk"
Advanced Graphic Commands:
1 - enable
0 - disable
-Control the blood, disable it to get more performance. But who doesnt like blood?
violence_ablood
violence_hblood
-Control the gibs, disable to get more performance
violence_agibs
violence_hgibs
-Control the ATI Trufrom, disable to get a big fps improvement, enable for more quality
ati_npatch "0"
ati_subdiv "0"
-Disabling it will make the game render everything, even objects you dont see, only crazy people will disable it.
gl_cull
-Enabling this will make sure you wont see any crashes and/or 3d bugs, disable it for more FPS
gl_keeptjunctions
-Multi texturing, disable it only on old 3d cards
gl_texsort
-MMX, enable to improve performance
r_mmx
-Joystick, disable for more ram and to improve performance
joystick
-disable dither only if you have a really good computer, enable for more performance improvement
gl_dither
-Enable for more model quality, disable for more performance-
gl_smoothmodels
-Vsync, enable to limit the fps into your refresh rate, disable for highest fps
vid_wait
-Lightholes, disable for a little performance gain-
gl_lightholes
-Enable to see some objects like 1337 sunglasses and stuff like that, disable for more performance
r_mirroralpha
-Precaching, disable if you have 64mb or less, enable if you have 64mb or more, improves performance
precache
-Enable or disable the rain in aztec
cl_weather
-Loading only 2 models, SAS and 1337, enable for big performance gain, disable to see all the models
cl_minmodels
-Round down, set value from 0-4 , the lower the number the higher the quality, higher number equals more performance
gl_round_down
-Map quality, set value from 0-2, lower number equals more quality, higher number equals more performance
gl_picmip
-Player model quality, set value from 0-2, lower number equals more quality, higher number equals more performance
gl_playermip
-Texture size, values are: 16,32,64,128,256,512,1024 (default is 128), lower value means less quality and more performance
gl_max_size
-Texture Quality (for Direct3D Trilinear bring more performance, and for OpenGL Brilinear bring more perormence) values
GL_LINEAR_MIPMAP_LINEAR (Trilinear, high quality)
GL_LINEAR_MIPMAP_NEAREST (Trilinear, low quality)
GL_NEAREST_MIPMAP_LINEAR (Bilinear, high quality)
GL_NEAREST_MIPMAP_NEAREST (Bilinear, high quality)
gl_texturemode
Example:
gl_texturemode "GL_NEAREST_MIPMAP_NEAREST"
-Fastsprites, control explosions and stuff like that, set value
from 0-2, lower number equals more quality, higher number equals more
performance
copy/paste sa KGB-HQ foruma
P.S Samo za steam CS,meni je dosta pomoglo -.-
